FixVault
Home › Subaru › 1991 › XT Automatic › Repair and Diagnosis › Suspension › Wheel Alignment › Wheel Alignment Specifications & Procedures › Wheel Alignment Procedures › Toe-In Adjustment › Loyale, XT & XT6 (Rear)

Loyale, XT & XT6 (Rear)

  1. Remove wheel. Loosen outer arm mounting bolts. See Figure. If toe-in is excessive, push/pull rear axle toward rear of vehicle while tightening outer arm mounting bolts.
  2. If toe-out is excessive, push/pull rear axle toward front of vehicle while tightening outer arm mounting bolts. Changing toe-in will change camber angle. Changing camber angle will change toe-in measurement. Tighten outer arm mounting bolts to 94-108 ft. lbs. (127-147 N.m).
About FixVault