FixVault
Home › Subaru › 1991 › XT Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls - System/Component Tests › Emission Systems & Sub-Systems › High Altitude COMPENSATOR › Vacuum Line Control Solenoid Valve (Justy Carbureted)

Vacuum Line Control Solenoid Valve (Justy Carbureted)

  1. Connect ohmmeter leads between terminals of solenoid. If resistance is not 10-100 ohms, replace solenoid valve.
  2. Using an ohmmeter, ensure windings are not grounded. Apply battery voltage to valve terminals. Ensure passage opens and closes as voltage is applied and removed.
  3. When solenoid is not energized, passage between "A" and "B" should be closed and open between "B" and "C". See Figure . When solenoid is energized, passage between "A" and "B" should be open and closed between "B" and "C". If solenoid valve does not operate properly, replace solenoid valve.
About FixVault