Blower Switch

Remove heater control panel. See HEATER CONTROL PANEL under REMOVAL & INSTALLATION. Using ohmmeter, check continuity between specified terminals with blower switch in specified position. See BLOWER SWITCH TEST table. See Fig 1 . Replace blower switch if it does not test as specified.

Fig 1: Testing Blower Switch

Courtesy of SUBARU OF AMERICA, INC.

BLOWER SWITCH TEST

Switch Position	Continuity Between Terminal No.
1	1, 2; & 6
2	1, 3; & 6
3	1, 4; & 6
4	1, 5; & 6