Brake/Stop Light Switch
Disconnect brake/stop light switch harness connector. Measure resistance between terminal with brake pedal in appropriate position. See TESTING BRAKE/STOP SWITCH . SeeFig 1 . If continuity is not as specified, replace brake/stop light switch.
TESTING BRAKE/STOP SWITCH (1)
| Pedal Position | Brake Switch Between No. 1 & 4 | Stoplight Switch Between No. 2 & 3 | ||
|---|---|---|---|---|
| Down | No Continuity | Continuity | ||
| Up | Continuity | No Continuity | ||
|
||||