Extension Case: Installation

WARNING: This page is about a different car, the 2001 Subaru Outback, 2001 Subaru Legacy, 2001 Subaru Impreza, and 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Attach the selected thrust needle bearing to the end surface of reduction drive gear with vaseline.
NOTE: Install thrust needle bearing in the correct direction.
Install the extension case to the transmission case.
Tighten bolts to secure the case.
Tightening torque:
1. 25 N.m (2.5 kgf-m, 18.1 ft-lb)
  
  Fig 1: Installing Extension Case
Install the rear vehicle speed sensor.
Tightening torque:
1. 7 N.m (0.7 kgf-m, 5.1 ft-lb)
  
  Fig 2: Installing Rear Vehicle Speed Sensor