Front Differential: Disassembly

WARNING: This page is about a different car, the 2001 Subaru Outback, 2001 Subaru Legacy, 2001 Subaru Impreza, and 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Using a press and ST, remove the taper roller bearing.
ST 498077000 REMOVER

Fig 1: Removing Tapered Roller Bearing
Secure the case in a vise and remove the crown gear tightening bolts, then separate the crown gear, case (RH) and case (LH).

Fig 2: Removing Crown Gear Tightening Bolts & Separating Crown Gear Cases
Pull out the straight pin and shaft, and remove the differential bevel gear, washer, and differential bevel pinion.

Fig 3: Pulling Out Straight Pin & Shaft