Inhibitor Switch: Adjustment
WARNING: This page is about a different car, the 2001 Subaru Outback, 2001 Subaru Legacy, 2001 Subaru Impreza, and 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the three inhibitor switch securing bolts.
- Shift the select lever to the N range.
- Insert ST as vertical as possible into the holes in the inhibitor switch lever and switch body. ST 499267300 STOPPER PIN
- Tighten the three inhibitor switch bolts.
Tightening torque:
- 3.4 N-m (0.35 kgf-m, 2.5 ft-Ib)
- Repeat the above checks. If the inhibitor switch is determined to be "faulty", replace it.