FixVault

3.0 L Model

WARNING: This page is about a different car, the 2001 Subaru Outback and 2001 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain fluid from the reservoir tank.
  2. Disconnect return hose and suction hose from reservoir tank.
    CAUTION:
    • Do not allow fluid from the hose end to come into contact with pulley belt.
    • To prevent foreign matter from entering the hose, cover the open ends of them with a clean cloth.
    Fig 1: Disconnecting Return & Suction Hoses From Reservoir Tank
    G02111181
  3. Remove reservoir tank from bracket by pulling it upwards.