FixVault
Home › Subaru › 2000 › Outback Base, Standard › Repair and Diagnosis › External Pages › Different car › Section 38 (On-Vehicle Service & Testing) › Dropping Resistor › Installation

Dropping Resistor: Installation

WARNING: This page is about a different car, the 2001 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

  1. Tightening torque:  6.4 N.m (0.65 kgf-m, 4.7 ft-lb)
Fig 1: Installing Dropping Resistor
G02060069
About FixVault