FixVault
Home › Subaru › 2001 › Forester Base › Repair and Diagnosis › Heating, Ventilation & A/C (HVAC) › HVAC Control Systems › Air Conditioning System › Service Procedure › Condenser › Inspection

Service Procedure: Condenser: Inspection

  1. Make sure the condenser fins are free from dust and insects. If the fins are clogged, clean by blowing air or water through them.
    NOTE: To prevent dust and water from getting into the condenser, this work must be done when the condenser is installed in an actual vehicle.
  2. Check the condenser to see if it shows any sign of oil. Should oil ooze or gas leak from the condenser replace it with a new one.
About FixVault