FixVault
Home › Subaru › 2001 › Forester L, Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 2 (On-Vehicle Service & Testing) › Service Procedure › Reduction Driven Gear › Assembly

Reduction Driven Gear: Assembly

WARNING: This page is about a different variant/trim than selected.
  1. Using a press, install ball bearing to reduction driven gear.
    Fig 1: Installing Ball Bearing To Reduction Driven Gear
    G02003323
  2. Install snap ring to reduction driven gear.
    Fig 2: Installing Snap Ring To Reduction Driven Gear
    G02003324
About FixVault