FixVault
Home › Subaru › 2001 › Impreza Outback Sport, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Diagnostics › SUBARU Select Monitor › Operation › Clear Memory Mode

Clear Memory Mode

  1. On the [Main Menu] display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the [System Selection Menu] display screen, select the {Transmission Control System} and press the [YES] key.
  3. Press the [YES] key after displayed the information of engine type.
  4. On the [Transmission Diagnosis] display screen, select the {Clear Memory} and press the [YES] key.
  5. When the `Done' and `Turn Ignition Switch OFF' are shown on the display screen, turn the Subaru Select Monitor and ignition switch to OFF.
About FixVault