Valve Rocker Assembly: Assembly
WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
- Install adjuster screw and nut to valve rocker.
- Arrange valve rocker arms, springs and shaft supports in assembly order and insert valve rocker shaft.
- Tightening torque (Shaft supports installing bolts): 5 N.m (0.5 kgf-m, 3.6 ft-lb)
CAUTION: Valve rocker arms, rocker shaft and shaft supports have identification marks. Ensure parts with same markings are properly assembled. - Install valve rocker shaft securing bolts.