FixVault
Home › Subaru › 2001 › Outback Base, Automatic › Repair and Diagnosis › External Pages › Different car › Section 127 (A/T & M/T Control Systems) › Select Lever › Inspection

Select Lever: Inspection

WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Inspect removed parts by comparing with new ones for deformation, damage and wear. Correct or replace if defective.
  2. Confirm the following parts for operating condition before assembly. Moving condition of the selector lever upper... it should move smoothly.
  3. Check shift lock operation. Refer to INSPECTION  , AT Shift Lock Systems.
About FixVault