Section 131 (Washer System & Wiper System): General Description: Caution

WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Reconnect connectors and hoses securely.
After reconnecting, confirm that each function operates normally.
Be careful that wire harnesses of airbag system pass near electrical parts and switches.
The harness and connector of all airbag systems are colored with yellow. Do not use a tester on these circuits.
Care must be taken when installing the piping hose so that no bending, jamming, etc. are caused.
If even a little oil or grease such as silicon oil gets in the tank and washer passages, an oil film easily forms on the glass, causing the wiper to chatter and judder. Therefore, be careful not to let this happen.