Sunload Sensor (Auto A/C): Removal

WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect ground cable from battery.
Insert a slotted screwdriver to remove sunload sensor.

Fig 1: Removing Sunload Sensor With Screwdriver
Courtesy of SUBARU OF AMERICA, INC.
Disconnect sunload sensor connector.

Fig 2: Disconnecting Sunload Sensor Connector

Courtesy of SUBARU OF AMERICA, INC.

CAUTION: Be careful not to damage sensors and interior trims when removing them.