FixVault
Home › Subaru › 2001 › Outback Base, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Overhaul Automatic Transmission › Rear Drive Shaft › Disassembly

Rear Drive Shaft: Disassembly

  1. Using a press, remove the revolution gear.
    Fig 1: Removing Revolution Gear
    G02053137
  2. Using a press, remove the front and rear side ball bearings and clutch hub.
    Fig 2: Removing Front & Rear Side Ball Bearings - Removing Clutch Hub
    G02053138
About FixVault