FixVault
Home › Subaru › 2001 › Outback Base, Standard › Repair and Diagnosis › External Pages › Different car › Section 130 (Lighting System) › High-mounted Stop Light › Removal › Wagon

High-mounted Stop Light: Removal: Wagon

WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect ground cable from battery.
  2. Remove cap (a) by prying on the edge with a screwdriver.
  3. Remove screws (b) and then detach cover (c).
  4. Remove screws (d) and then detach high-mounted stop light while disconnecting connector.
Fig 1: Removing Cap Prying On Edge With Screwdriver
G02961971Courtesy of SUBARU OF AMERICA, INC.
About FixVault