FixVault
Home › Subaru › 2001 › Outback Base, Standard › Repair and Diagnosis › External Pages › Different car › Section 135 (Fuel Injection (Fuel Systems, H4SO)) › Pressure Sensor › Installation

Pressure Sensor: Installation

WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

  1. Tightening torque:  2.4 N.m (0.24 kgf-m, 1.7 ft-lb)
    Fig 1: Installing Pressure Sensor
    G02874901Courtesy of SUBARU OF AMERICA, INC.
NOTE: Replace O-ring with a new one.
About FixVault