Section 206 (Lubrication (H4SO)): General Description: Specifications
WARNING: This page is about a different car, the 2004 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
General Specifications Chart
| Lubrication method | Forced lubrication | |||
| Oil pump | Pump type | Trochoid type | ||
| Number of teeth | Inner rotor | 9 | ||
| Outer rotor | 10 | |||
| Outer rotor diameter x thickness | 78 x 7 mm (3.07 x 0.28 in) | |||
| Tip clearance between inner and outer rotor | STANDARD | 0.04-0.14 mm (0.0016-0.0055 in) | ||
| LIMIT | 0.18 mm (0.0071 in) | |||
| Side clearance between inner rotor and pump case | STANDARD | 0.02-0.07 mm (0.0008-0.0028 in) | ||
| LIMIT | 0.12 mm (0.0047 in) | |||
| Case clearance between outer rotor and pump case | STANDARD | 0.10-0.175 mm (0.0039-0.0069 in) | ||
| LIMIT | 0.20 mm (0.0079 in) | |||
| Capacity at 80°C (176°F) | 600 rpm | - Discharge pressure | 98 kPa (1.0 kg/cm2 ,14 psi) | |
| - Discharge quantity | 3.2 l (3.4 US qt, 2.8 Imp qt)/min. | |||
| 5,000 rpm | - Discharge pressure | 294 kPa (3.0 kg/cm2 , 43 psi) | ||
| - Discharge quantity | 32.6 l (34.4 US qt, 28.7 Imp qt)/min. | |||
| Relief valve operation pressure | 490 kPa (5.0 kg/cm2 , 71 psi) | |||
| Oil filter | Type | Full-flow filter type | ||
| Filtration area | 760 cm2 (118 sq in) | |||
| By-pass valve opening pressure | 157 kPa (1.60 kg/cm2 , 22.8 psi) | |||
| Outer diameter x width | 80 x 70 mm (3.15 x 2.76 in) | |||
| Oil filter to engine thread size | M 20 x 1.5 | |||
| Oil pressure switch | Type | Immersed contact point type | ||
| Working voltage - wattage | 12 V - 3.4 W or less | |||
| Warning light activation pressure | 14.7 kPa (0.15 kg/cm2 , 2.1 psi) | |||
| Proof pressure | More than 981 kPa (10 kg/cm2 ,142 psi) | |||
| Oil capacity (at replacement) | 4.0 l (4.2 US qt, 3.5 Imp qt) | |||