Rear Finisher Light Assembly: Removal: Pickup

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect ground cable from battery.
Remove tail gate tray. Refer to REMOVAL , Tail Gate Tray.
Remove tail gate cover.

Fig 1: Removing Tail Gate Cover
Courtesy of SUBARU OF AMERICA, INC.
Separate connector. Remove nuts and detach rear finisher light.

Fig 2: Detaching Rear Finisher Light
Courtesy of SUBARU OF AMERICA, INC.