Front Stabilizer: Installation

WARNING: This page is about a different car, the 2004 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

Install the bushing (on front crossmember side) while aligning it with paint mark on stabilizer.
Ensure the bushing and stabilizer have the same identification colors when installing. See Fig 1.

Install in the reverse order of removal.
Always tighten the rubber bushing location when wheels are in full contact with the ground and vehicle is curb weight. See TORQUE SPECIFICATIONS .

Fig 1: Ensuring Bushing & Stabilizer Have Same Identification Colors

Courtesy of SUBARU OF AMERICA, INC.