FixVault
Home › Subaru › 2001 › Outback Base, Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 3 (On-Vehicle Service & Testing) › Dropping Resistor › Removal

Dropping Resistor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G02037073
  2. Remove air intake duct.
  3. Disconnect connector from dropping resistor.
  4. Remove dropping resistor.
    Fig 2: Locating Dropping Resistor (2.5 L Model)
    G02037074
    Fig 3: Locating Dropping Resistor (3.0 L Model)
    G02037075
About FixVault