FixVault
Home › Subaru › 2001 › Outback Base, Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 4 (Overhaul Automatic Transmission) › Reduction Driven Gear › Disassembly

Reduction Driven Gear: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove snap ring from reduction driven gear.
    Fig 1: Removing Snap Ring
    G02053145
  2. Using ST, remove ball bearing from reduction driven gear.

    ST 498077600 REMOVER

    Fig 2: Removing Ball Bearing
    G02053146
  3. Remove snap rings from reduction driven gear. (2.5 L US model and 3.0 L model).
About FixVault