FixVault
Home › Subaru › 2001 › Outback Base, Standard › Repair and Diagnosis › Transmission › Manual Transmission › Switches and Harness › Removal

Switches and Harness: Removal

  1. Disconnect connector battery ground terminal.
  2. Disconnect connector back-up light switch and neutral position switch.
    Fig 1: Disconnecting Back-Up Light Switch And Neutral Position Switch Connectors
    G02037184
  3. Lift-up the vehicle.
  4. Remove back-up light switch and neutral position switch with harness.
    Fig 2: Removing Back-Up Light Switch And Neutral Position Switch With Harness
    G02037185
About FixVault