FixVault
Home › Subaru › 2002 › Forester Base › Repair and Diagnosis › Body & Frame › Exterior/Interior Trim › Crossbar › Removal

Exterior/Interior Trim: Crossbar: Removal

  1. Loosen and remove TORX bolt T30 from the top of each crossbar end support, and then remove inner clamp.
    Fig 1: Loosening & Removing TORX Bolt T30
    G02864060Courtesy of SUBARU OF AMERICA, INC.
  2. Remove crossbar.
    NOTE: When removing the front crossbar from the roof rail, first move the front crossbar to the center of the roof rail.
About FixVault