FixVault
Home › Subaru › 2002 › Forester Base › Repair and Diagnosis › External Pages › Different car › Section 108 (Glass/Window/Mirrors) › Windshield Glass › Removal › Using Piano Wire

Using Piano Wire

WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the cowl panel. Refer to REMOVAL , Cowl Panel.
  2. Remove the roof molding and upper front molding.
  3. Tape the body side of the circumference of windshield glass for protection.
  4. Make a hole in the adhesive layer using a drill or knife.
  5. Pass the piano wire through the hole, and attach securely both the wire ends to pieces of wood.
    Fig 1: Attaching Piano Wire Ends To Pieces Of Wood
    G02089529Courtesy of SUBARU OF AMERICA, INC.
  6. Pull the wire ends alternately to cut off the adhesive layer.
About FixVault