FixVault
Home › Subaru › 2002 › Forester Base › Repair and Diagnosis › External Pages › Different car › Section 110 (Security & Locks) › Keyless Transmitter › Replacement › Exiting Programming Mode

Exiting Programming Mode

WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the ignition key from the ignition switch.
  2. The horn will chirp three times to indicate that the system has exited the programming mode.
  3. Check the keyless entry system properly operates by operating each transmitter.
About FixVault