FixVault
Home › Subaru › 2002 › Forester Base › Repair and Diagnosis › External Pages › Different car › Section 13 (Power Door Locks & Keyless Entry Systems) › Programming › Remote Transmitter Programming › To Exit Programming Mode

To Exit Programming Mode

WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. After all transmitters are programmed, remove ignition key from the ignition switch. The horn will sound 3 times to indicate that the system has exited the programming mode.
  2. Make sure the keyless entry system properly operates by testing each transmitter.
About FixVault