FixVault
Home › Subaru › 2002 › Forester Base › Repair and Diagnosis › External Pages › Different car › Section 13 (Power Door Locks & Keyless Entry Systems) › Programming › Remote Transmitter Programming › To Program Transmitters

To Program Transmitters

WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: You must finish the next step (opening the driver's door) within 45 seconds of starting the PROGRAMMING procedure.
  1. Open driver's door.
  2. Close driver's door.
  3. Press and release any transmitter button that you wish to program into the system. Horn will chirp twice to indicate that the transmitter has been programmed.
NOTE: Any additional transmitters may also be programmed at this time. Repeat the above steps for each additional transmitter.
About FixVault