FixVault
Home › Subaru › 2002 › Forester Base › Repair and Diagnosis › External Pages › Different car › Section 16 (Anti-Theft Systems) › Component Tests › Security Control Module › Impact Sensitivity Test

Impact Sensitivity Test

WARNING: This page is about a different car, the 2002 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove key from ignition switch.
  2. Close all windows.
  3. Close all doors and rear gate, or trunk lid.
  4. Cover hood with a blanket.
  5. Press the LOCK/ARM button of the transmitter.
  6. Confirm that the security indicator light blinks every two (2) seconds.
  7. Hit the center of the windshield with your palm. See Fig 1 . Make sure the alarm operates. If no good, adjust the impact sensitivity. See SECURITY CONTROL MODULE (IMPACT SENSITIVITY)  under ADJUSTMENTS.
Fig 1: Testing Security Control Module's Impact Sensitivity
G00189410Courtesy of SUBARU OF AMERICA, INC.
About FixVault