FixVault

Check Battery Disconnect Protection

WARNING: This page is about a different car, the 2002 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove key from ignition switch.
  2. Close all doors and rear gate or trunk lid.
  3. Open front hood.
  4. Press LOCK/ARM button of the transmitter.
  5. Disconnect ground cable from the battery.
  6. Reconnect the cable to the battery.
  7. Check that the security indicator light blinks after reconnecting the battery cable. If no good, replace the security control module.