FixVault
Home › Subaru › 2002 › Forester Base › Repair and Diagnosis › External Pages › Different car › Section 175 (Automatic Transmission (Diagnostics)) › Subaru Select Monitor › Operation › Clear Memory Mode

Clear Memory Mode

WARNING: This page is about a different car, the 2004 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the << Main Menu >> display screen, select the {2. Each System Check} and press the [YES] key.
  2. On the << System Selection Menu >> display screen, select the {Transmission Control System} and press the [YES] key.
  3. Press the [YES] key after the information of transmission type is displayed.
  4. On the << Transmission Diagnosis >> display screen, select the {Clear Memory} and press the [YES] key.
  5. When the "Done" and "Turn Ignition Switch OFF" are shown on display screen, turn the Subaru Select Monitor and ignition switch to OFF.
NOTE: For detailed operation procedure, refer to the OEM - GENERAL INFORMATION .
About FixVault