FixVault

Rear Combination Light Assembly: Removal: Wagon

WARNING: This page is about a different car, the 2004 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. disconnect the ground cable from battery.
  2. Remove the clips, and then detach the rear combination light covers.
    Fig 1: Removing Rear Combination Light Covers (Wagon)
    G03511262Courtesy of SUBARU OF AMERICA, INC.
  3. Remove two bolts, and then remove the rear combination light while disconnecting connector.
    Fig 2: Removing Rear Combination Light While Disconnecting Connector (1 Of 2)
    G03511263Courtesy of SUBARU OF AMERICA, INC.
    Fig 3: Removing Rear Combination Light While Disconnecting Connector (2 Of 2)
    G03511264Courtesy of SUBARU OF AMERICA, INC.