Front Strut Assembly: Installation

WARNING: This page is about a different car, the 2003 Subaru Impreza and 2002 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.

Install the strut mount at upper side of strut to body and tighten with nuts.
CAUTION:
- While holding the head of adjusting bolt, tighten self-locking nut.
- Be sure to use a new self-locking nut.
Position the aligning mark on camber adjustment bolt with aligning mark on lower side of strut.
Install the ABS sensor harness to strut.
Install bolts which secure the brake hose to strut.
NOTE: Check wheel alignment and adjust if necessary.
Install the front wheels.