Throttle Position Sensor: Removal

WARNING: This page is about a different car, the 2003 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the ground cable from battery.

Fig 1: Disconnecting Ground Cable From Battery
Courtesy of SUBARU OF AMERICA, INC.
Disconnect the connector from the throttle position sensor.

Fig 2: Identifying Connector From Throttle Position Sensor For Disconnection
Courtesy of SUBARU OF AMERICA, INC.
Remove the throttle position sensor holding screws, and remove it.

Fig 3: Locating Screw For Removing Throttle Position Sensor
Courtesy of SUBARU OF AMERICA, INC.