Transverse Link: Removal

Set the vehicle on the lift.
Disconnect ground cable from battery.
Lift-up the vehicle and remove the wheel.
Disconnect stabilizer link from transverse link.
Remove bolt securing ball joint of transverse link to housing. See Fig 1.
Remove nut (DO NOT remove bolt.) securing transverse link to crossmember.
Remove 2 bolts securing bushing bracket of transverse link to vehicle body at rear bushing. See Fig 2.
Extract ball joint from housing.
Remove bolt securing transverse link to crossmember and extract transverse link from crossmember. See Fig 3.

Fig 1: Removing Bolt Securing Ball Joint

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Removing Bolts Securing Bushing Bracket

Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Removing Bolt Securing Transverse Link To Crossmember

Courtesy of SUBARU OF AMERICA, INC.