FixVault
Home › Subaru › 2002 › Forester Base › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission (On-Vehicle Service) › Dropping Resistor › Removal

Dropping Resistor: Removal

  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G02862544Courtesy of SUBARU OF AMERICA, INC.
  2. Remove air intake duct. Refer to REMOVAL under AIR INTAKE DUCT .
  3. Disconnect connector from dropping resistor.
  4. Remove dropping resistor.
    Fig 2: Removing Dropping Resistor
    G02862545Courtesy of SUBARU OF AMERICA, INC.
About FixVault