FixVault

Removal & Installation

WARNING: This page is about a different car, the 2002 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect ground terminal from battery.
  2. Remove instrument panel lower cover. See INSTRUMENT PANEL ASSEMBLY  .
  3. Remove nut. Remove keyless entry control module while disconnecting the connector. See Fig 1 .
  4. Install in reverse order of the removal procedure.
Fig 1: Removing Keyless Entry Control Module
G00189496Courtesy of SUBARU OF AMERICA, INC.