FixVault
Home › Subaru › 2002 › Impreza RS, Standard › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Security & Locks › Security Control Module › Removal

Security Control Module: Removal

  1. Disconnect the ground terminal from battery.
  2. Remove the console cover.
    Fig 1: Removing Console Cover
    G02868848
  3. Disconnect the connector from the security control module.
  4. Remove bolt (A) and loosen bolt (B).
    NOTE: Loosen bolt (B) without completely removing it.
    Fig 2: Disconnecting Connector From Security Control Module
    G02868849
  5. Remove the security control module.
About FixVault