FixVault
Home › Subaru › 2002 › Outback Base, 4D Sedan › Repair and Diagnosis (Single Page) › Engine Performance › Engine Control Systems › Fuel Injection (Fuel Systems) (H6DO) › Fuel Pump › Disassembly

Fuel Pump: Disassembly

  1. Remove fuel pump and pump holder.
    NOTE: When disassembling pump holder, be careful as it is installed with two pawls.
    Fig 1: Removing Fuel Pump And Pump Holder
    G03584405Courtesy of SUBARU OF AMERICA, INC.
  2. Disconnect connector from fuel pump.
    Fig 2: Disconnecting Connector From Fuel Pump
    G03584406Courtesy of SUBARU OF AMERICA, INC.
About FixVault