Freeze Frame Data
NOTE:
- Data stored at the time of trouble occurrence is shown on display.
- Each time trouble occurs, the latest information is stored in the freeze frame data in memory.
- If freeze frame data is not properly stored in memory (due to a drop in ABSCM power supply, etc.), a diagnostic trouble code (DTC), preceded by a question mark "?", appears on the select monitor display. This shows it may be an unreliable reading.
FREEZE FRAME DATA
| Display screen | Contents to be monitored |
|---|---|
| FR wheel speed | Wheel speed detected by the Front Right ABS sensor is displayed in km/h or mile/h. |
| FL wheel speed | Wheel speed detected by the Front Left ABS sensor is displayed in km/h or mile/h. |
| RR wheel speed | Wheel speed detected by the Rear Right ABS sensor is displayed in km/h or mile/h. |
| RL wheel speed | Wheel speed detected by the Rear Left ABS sensor is displayed in km/h or mile/h. |
| ABSCM power voltage | Power (in volts) supplied to ABSCM&H/U appears on the select monitor display. |
| G sensor output voltage | Refers to vehicle acceleration detected by the analog G sensor. It appears on the select monitor display in volts. |
| Motor relay monitor | Motor relay operation monitor signal |
| Stop light switch | Stop light switch signal |
| ABS signal to TCM | ABS operation signal from ABS control module to TCM |
| ABS-AT control | ABS operation signal from ABS control module to TCM |
| ABS operation signal | ABS operation signal |