FixVault
Home › Subaru › 2002 › Outback L.L. Bean Edition › Repair and Diagnosis › Transmission › Transmission Control Systems › A/T & M/T Control Systems › Select Lever › Assembly

Select Lever: Assembly

  1. Clean all parts before assembly.
  2. Apply grease [MULTEMP AC-D or equivalent] to each parts. Refer to AT SELECT LEVER  , COMPONENT, General Descriptions.
  3. Assembly is in the reverse order of disassembly.
  4. After completion of fitting, transfer select lever to position " P" - "1", then check whether the indicator and select lever agree, whether operating force is.
About FixVault