FixVault
Home › Subaru › 2003 › Baja Automatic › Repair and Diagnosis (Single Page) › Body & Frame › Door Locks › Security & Locks (All Models) › Security Control Module › Adjustment › Impact Sensitivity

Impact Sensitivity

NOTE: Before adjustment, make sure the security control module has been securely installed on the bracket.
  1. Remove the security control module. < Ref. to REMOVAL , Security Control Module.>
  2. Adjust the sensitivity adjust screw in the security control module.
    NOTE: After adjusting, be sure to plug the adjust screw hole.
    Fig 1: Adjusting Sensitivity Adjusting Screw In Security Control Module
    G02873063Courtesy of SUBARU OF AMERICA, INC.
  3. Install the security control module.
  4. Perform the impact sensitivity test.
About FixVault