FixVault
Home › Subaru › 2003 › Baja Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 1 (Automatic Trans) › Reduction Driven Gear › Disassembly

Reduction Driven Gear: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove snap ring from reduction driven gear.
    Fig 1: Removing Snap Ring From Reduction Driven Gear
    G02875934Courtesy of SUBARU OF AMERICA, INC.
  2. Using ST, remove ball bearing from reduction driven gear.
    1. ST 498077600 REMOVER
    Fig 2: Removing Ball Bearing From Reduction Driven Gear
    G02875935Courtesy of SUBARU OF AMERICA, INC.
About FixVault