Transfer Clutch: Installation

WARNING: This page is about a different variant/trim than selected.

Select the thrust needle bearing.
Install the transfer clutch assembly to the case.

Fig 1: Installing Transfer Clutch Assembly To Case
Courtesy of SUBARU OF AMERICA, INC.
Tighten bolts to secure the case.
1. Tightening torque: 25 N.m (2.5 kgf-m, 18.1 ft-lb)
  
  Fig 2: Tightening Bolts To Secure Case
  Courtesy of SUBARU OF AMERICA, INC.
Install the transmission assembly to vehicle. < Ref. to INSTALLATION , Automatic Transmission Assembly.>