Steering Wheel: Installation
WARNING:
Always refer to AIR BAG RESTRAINT SYSTEMS
before performing airbag module service.
.
- Align the center of roll connector. Refer to AIR BAG RESTRAINT SYSTEMS .
- Install in the reverse order of removal.
NOTE:
Align matching marks on the steering wheel and steering shaft.
- Tightening torque: 45 N.m (4.6 kgf-m, 33.2 ft-lb)
- Column cover-to-steering wheel clearance: 2 - 4 mm (0.08 - 0.16 in)
CAUTION:
Insert the roll connector guide pin into guide hole on lower end of surface of steering wheel to prevent damage.