Oil Pressure Switch: Installation

Apply liquid gasket to the oil pressure switch threads.
Liquid gasket:
1. Part No. 004403007
2. Three Bond 1324 or equivalent
  
  Fig 1: Applying Liquid Gasket To Oil Pressure Switch Threads
  Courtesy of SUBARU OF AMERICA, INC.
Install the oil pressure switch onto engine block.
1. Tightening torque: 25 N.m (2.5 kgf.m, 18.1 ft.lb)
Fig 2: Installing Oil Pressure Switch Onto Engine Block
Courtesy of SUBARU OF AMERICA, INC.
Connect the terminal of oil pressure switch.

Fig 3: Connecting Terminal Of Oil Pressure Switch
Courtesy of SUBARU OF AMERICA, INC.
Install the generator on bracket, see INSTALLATION , Generator.