FixVault
Home › Subaru › 2003 › Outback Base, 4D Sedan › Repair and Diagnosis › Accessories & Equipment › Cruise Control Systems › Cruise Control System › Cruise Control Main Switch › Removal

Cruise Control Main Switch: Removal

  1. Disconnect ground cable from battery.
  2. Remove hook (B) and then remove switch panel (A) while disconnecting connector.
    Fig 1: Removing Hook & Switch Panel
    G02872399Courtesy of SUBARU OF AMERICA, INC.
  3. Remove main switch by pushing it outward.
    Fig 2: Removing Main Switch By Pushing Outward
    G02872400Courtesy of SUBARU OF AMERICA, INC.
About FixVault