FixVault
Home › Subaru › 2003 › Outback Base, 4D Wagon, Standard › Repair and Diagnosis › External Pages › Different variant/trim › Section 9 (Automatic Trans) › Dropping Resistor › Installation

Dropping Resistor: Installation

WARNING: This page is about a different variant/trim than selected.
  1. Install in the reverse order of removal.
    1. Tightening torque:  6.4 N.m (0.65 kgf-m, 4.7 ft-lb)
    Fig 1: Installing Dropping Resistor
    G02875850Courtesy of SUBARU OF AMERICA, INC.
About FixVault